Salmonflies
Pteronarcys californica
The giant Salmonflies of the Western mountains are legendary for their proclivity to elicit consistent dry-fly action and ferocious strikes.
Featured on the forum
This one seems to tentatively key to Holocentropus, although I can't make out the anal spines in Couplet 7 of the Key to Genera of Polycentropodidae Larvae nor the dark bands in Couplet 4 of the Key to Genera of Polycentropodidae Larvae, making me wonder if I went wrong somewhere in keying it out. I don't see where that could have happened, though. It might also be that it's a very immature larva and doesn't possess all the identifying characteristics in the key yet. If Holocentropus is correct, then Holocentropus flavus and Holocentropus interruptus are the two likely possibilities based on range, but I was not able to find a description of their larvae.
Troutnut is a project started in 2003 by salmonid ecologist Jason "Troutnut" Neuswanger to help anglers and
fly tyers unabashedly embrace the entomological side of the sport. Learn more about Troutnut or
support the project for an enhanced experience here.
Tugboater20
Posts: 1
Posts: 1
Tugboater20 on May 12, 2008May 12th, 2008, 4:55 am EDT
Hi fellow waterwhippers,
I'm new to the forum and newish to fly fishing. I started when I was in 8th grade and stopped in college. I just picked it up again(15 years later) a few weeks ago and came across some of my old gear in the basement.
I have an Ocean City 36 in great shape except for one thing. It's missing the spool retaing screw. Does anyone know what I should pick up to replace it? I need thread pitch/count and length. The markings on the spool make it look like there isn't a washer if I'm wrong please let me know.
THanks heaps.
Tug
I'm new to the forum and newish to fly fishing. I started when I was in 8th grade and stopped in college. I just picked it up again(15 years later) a few weeks ago and came across some of my old gear in the basement.
I have an Ocean City 36 in great shape except for one thing. It's missing the spool retaing screw. Does anyone know what I should pick up to replace it? I need thread pitch/count and length. The markings on the spool make it look like there isn't a washer if I'm wrong please let me know.
THanks heaps.
Tug
Whipping the water to death since 1986. Take that water!!
GONZO on May 12, 2008May 12th, 2008, 7:26 am EDT
Hi Tug,
Losing the retaining screw was a common problem with the Ocean City reels, but I hope that you can salvage this simple Philadelphia classic. If you can find or make a suitable replacement for the screw, it should continue to give good service.
I have an old OC 35, but I'm not sure if the retaining screw is the same size on both models. On the 35, the screw is a slightly domed slotted screw with a head diameter of about 10mm or 3/8". The stem is very short, about 5mm or 3/16" long and just slightly smaller in diameter. I don't have a thread gauge, but there are between 5 and 6 turns along the length.
I'm sorry that I cannot provide more exact dimensions and thread pitch/count. I can only suggest cleaning the threads of the female part of the spindle and VERY GENTLY trying some candidate screws. (The female threads are brass.) If you find one that fits without binding, you can cut/grind it to length and polish the cut end.
There is no washer, and the spool is held against the retaining screw by tension from the spring that encircles the spindle. When mounting the spool, it should be pushed tightly against the spring exposing the top of the spindle. (Mine "pops" when the spring is fully compressed.) The screw should then be tightly seated against the top of the spindle. The spindle and the top of the spool sleeve (the part that engages the underside of the head of the retaining screw) should be lubricated. Proper seating of the screw and lubrication will prevent the screw from working loose when the spool revolves.
I hope that helps.
Best,
Gonzo
Losing the retaining screw was a common problem with the Ocean City reels, but I hope that you can salvage this simple Philadelphia classic. If you can find or make a suitable replacement for the screw, it should continue to give good service.
I have an old OC 35, but I'm not sure if the retaining screw is the same size on both models. On the 35, the screw is a slightly domed slotted screw with a head diameter of about 10mm or 3/8". The stem is very short, about 5mm or 3/16" long and just slightly smaller in diameter. I don't have a thread gauge, but there are between 5 and 6 turns along the length.
I'm sorry that I cannot provide more exact dimensions and thread pitch/count. I can only suggest cleaning the threads of the female part of the spindle and VERY GENTLY trying some candidate screws. (The female threads are brass.) If you find one that fits without binding, you can cut/grind it to length and polish the cut end.
There is no washer, and the spool is held against the retaining screw by tension from the spring that encircles the spindle. When mounting the spool, it should be pushed tightly against the spring exposing the top of the spindle. (Mine "pops" when the spring is fully compressed.) The screw should then be tightly seated against the top of the spindle. The spindle and the top of the spool sleeve (the part that engages the underside of the head of the retaining screw) should be lubricated. Proper seating of the screw and lubrication will prevent the screw from working loose when the spool revolves.
I hope that helps.
Best,
Gonzo
Quick Reply
Related Discussions
Topic
Replies
Last Reply
0
May 15, 2016
by Leonardo
by Leonardo
2
Oct 19, 2015
by Wbranch
by Wbranch